Need help?Do you have a question about the RNA ESR 3000 Series and is the answer not in the manual?
General| Brand | RNA |
|---|---|
| Model | ESR 3000 Series |
| Category | Controller |
| Language | English |
Compliance with Low-Voltage and EMC Directives.
Lists DIN EN 60204 and EN 61439-1.
Defines qualified workers for safe operation.
Critical safety notice about electrical hazards.
Specifies devices are for industrial vibratory feeders.
Overview of ESR 3000/ESM 3000 for vibratory feeder control.
Highlights mains independent frequency, closed-loop control.
Controller compliance with EC directives.
Using the control panel and menu system.
Manages material level with ON/OFF delays and sensor.
Enables coarse/fine switchover to a second setpoint.
Details various input/output signals and their functions.
Explains status indications on the device display.
Features of the two available unit types.
Lists electrical, environmental, and physical data.
Codes for ordering different controller versions.
Overview of adjustable settings for feeders and level control.
Details the six-button pad and LED display.
How to navigate menus, enter codes, and adjust settings.
Guidelines for mounting and ventilation.
Essential checks before powering up the device.
Advice on operating frequency and magnet load.
Steps for the first power-on and basic configuration.
How to set the desired feed rate via menu codes.
Method to find the feeder's resonance frequency.
Settings for feeder limits, soft start/stop times.
Setting ON/OFF delays and sensor logic.
Configuring sensor timeouts and valve output delay.
Selecting setpoint input (display, external, potentiometer).
Configuring indexed feeding parameters.
Procedures for managing user-defined parameter sets.
Option to conceal parameter menus from users.
Explains error indicators like OL, OC, OV, PER, SE.
Steps to clear error messages via menu or controls.
Wiring diagrams and pinouts for enclosed units.
Detailed connection points for the 12A enclosed model.
Wiring diagrams and pinouts for the 6A cabinet unit.
Detailed connection points for the 16A cabinet model.
Physical size and mounting dimensions for the 6A enclosed unit.
Physical size and mounting dimensions for the 12A enclosed unit.
Physical size and mounting dimensions for the 6A cabinet unit.
Physical size and mounting dimensions for the 16A cabinet unit.
How to enable and access critical service parameters.
Adjusting frequency limits and understanding AFC.
Setting maximum output current for magnet protection.
Enabling service mode for critical adjustments.
To Next Page
