Roadtrek CHASE 2021 - Wireless Switch Pairing

15
The wireless Mid Switch will need to be paired to the touchscreen before first use.
Press and Hold the switch graphic for 5 seconds.
Tap Start Pairing. You’ll have 30 seconds to press and hold both buttons on the switch
panel at the same time for 5 seconds.
Tap Done once the pairing successful message appears. It may take up to 10 minutes for
the battery switch indicator to turn Green, but the switch should work instantly once
paired. If at this point the switch still fails to work, press and hold the Clear button (not
pictured) for 3 seconds and repeat the pairing procedure once again.
r
1
1
2
3
Wireless Switch Pairing
2
3