Recovery regeneration
When the regeneration processed has been postponed too often, the machine needs to execute a Recovery
regeneration. A message shows on the display before a Recovery regeneration will be executed. The Recovery
regeneration cannot be executed during operation.
NOTICE It takes about 4 hours to complete the Recovery regeneration. The machine cannot be used during
that time.
Before starting a Stationary regeneration, make sure you meet the following conditions:
1. Park the machine safely.
2. Apply the parking brake.
3.
Press the inhibit switch: .
4.
Confirm the regeneration by pressing the Recovery Regeneration Permitted switch: for 3 seconds.
5. Press the Recovery Regeneration Permitted switch again for 1 second.
You are now in the Recovery regeneration status.
Description 32
To Next Page
Loading...
