Roberts Rambler - Manual Tuning - FM; Manual FM Tuning Steps

Manual tuning - FM
1. Carefully extend the telescopic aerial. The aerial should be fully
extended and positioned vertically for optimum reception.
2. Press and release the On/Off button to switch on your radio.
3. Press and release the Mode button until the 'FM' mode is selected.
4. Rotate the Tuning/Select control to tune to a station.The frequency will
change in steps of 50kHz. If the radio is tuned to a station of suffi cient
signal strength with RDS information present, then the display may
change to show the station name.
5. When the waveband end is reached the radio will recommence tuning
from the opposite waveband end.
6. Adjust the Volume to the required setting.
7. To switch off your radio, press and release the On/Off button.
14
2,7
3
6
4