EasyManua.ls Logo

Roberts Rambler - Alarm Sound Behavior; Alarm Operation and Indicators; Cancelling Alarms; Stopping a Sounding Alarm

Roberts Rambler
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
Cancelling alarms
1. While an alarm is sounding press and release the On/Off button to
cancel the alarm.
When the alarm sounds
The alarm will sound at the selected times for up to 60 minutes unless cancelled. The maximum volume used for the radio alarm will be speci ed
during the alarm setting procedure.
When your radio is set to wake by the radio alarm, your radio will switch to the selected radio station. If the radio cannot tune to the speci ed radio
station, the buzzer will be used instead.
Note: If the radio is switched on because of a radio alarm you can control basic functions such as the volume.
When the buzzer alarm activates it will start softly and gradually increase in level.
The alarm icon will ash on the screen and the radio will automatically switch back to standby mode when the 60 minutes have elapsed.
Snooze function
1. When the radio or buzzer alarm sounds, press and release any button
except the On/Off button. This will silence the alarm for 5 minutes.
When the Snooze has been activated the display will show the Snooze
symbol
. This sequence can be repeated during the 60 minute
alarm period.
2. To cancel the Snooze function, press and release the On/Off button.
1

Related product manuals