Robertshaw SENSE SMART 2000 - Commercial Program Copy Option; BMS Control Indicator

34


ConnuetopressthePROGbuontoadvancetothenextday.EnterSTART
andthenSTOPmesandthenadvancetothenextday.
OR

Tocopythevaluesyouhavejustsettootherdaysoftheweek,pressthep
or  buttonstoTAGeachaddionaldayyouwishtocopythecurrentlyset
daysprogramto.WhenyouhavenishedTaggingthedaysyoudesire,press
thePROGbuontoiniatethecopyprocess.ThewordCOPYwillashbriey
toconrmthecopyprocess,Figure13,andyourcurrentdaysvalueswillbe
copied to the days selected. Normal programming will resume at the next day
to be programmed.
NOTE: Yourthermostat'sprogramsmaybecontrolledfromaBMS,
thereby overriding any program you may have entered into the
thermostat as described above. If the BMS is controlling the
thermostat,thewordSTARTorSTOPwillblinkintheLCDto
indicate the thermostat program is under BMS control.