14.
CHECKS
and
CORRECTIONS
-
After disassembling and cleaning the engine, check and repair, if necessary, according
to
the correction table.
familier with the contents of this table. Correct maintenance is recommended by observing the correction
standards specified.
The meanings
of
the terms used in the correction table are as follows:
-
The correction table apolies whenever the engines are repaired. It is important for the servicemen to be
Correction
Repair, adjustment or replacement
of
any engine parts.
Correction Limit
The
limit
on wear, damage or functional deterioration of engine parts beyond which normal engine per-
formance cannot be expected without repairing such parts.
Use Limit
The limit beyond which parts can no longer be used in respect of performance or strength.
Standard Dimensions
The design dimensions
of
new parts minum tolerance.
Correction Tolerance
Tolerance on the dimensions of engine parts refinished or adjusted.
-
39
-
To Next Page
Loading...
