Robin FL-H7500 - 5. CARBURETOR DISASSEMBLY AND REASSEMBLY; 3) Notice; 4) Disassembly and reassembly procedure; 5) Checking procedure

48
5.CARBURETORDISASSEMBLYANDREASSEMBLY 
ThisengineisequippedwithadiaphragmtypeCARBURETOR.

1)Functionandstructureofthediaphragmsystem.
Sincethefuelleveliskeptconstant,inspiteofanytiltangleoftheengine,itcanbeoperatedat
anyposition.Thefloatchamberisprovidedwithadiaphragmandcoveredbyacover.Negativepressure
intheairintakepassagecausesthediaphragmtoswellupwardandtherebypushingupthehingetoopen
thevalve.Uponthedisappearanceofthenegativepressure,thevalveisclosedbythespringpressure.
Thenthefuelflowratecanbecontrolledbymarkinganappropriatedeterminationofthediaphragmarea
andspringpressure.

2)Disassemblyandreassembly











