108
씰 Slide the battery compartment back into the meter and press
gently inwards until it clicks home.
씰 After replacing the battery, check the performance of the
monitor as described in Chapter 6.
If you complete the replacement within about 1 minute, the date and
time settings will be retained. All of the other results will be retained
however long it takes to replace the battery.
Think of the environment. Please take your used batteries to a
collection point if you have one locally.
Remove the battery if your Accu-Chek Active meter is to remain
unused for some time.
Never throw batteries into a fire.
This is dangerous because they will explode.
7.2 Battery life and battery replacement
man_04493168001_02_EnUK.indd 108 1/12/2006, 11:29:23 ðì
To Next Page
Loading...
