32
The properties of the Accu-Chek Active test strips you use with the
meter may differ very slightly from one pack to another (because of
batch-to-batch differences). Your Accu-Chek Active meter must be
programmed to allow for these differences in properties in a process
known as “coding”. All the information relating to the strips in a
particular pack of Accu-Chek Active test strips is held in the coding
chip that comes with that pack.
3.3 Coding
man_04493168001_02_EnUK.indd 32 1/12/2006, 11:28:53 ðì
To Next Page
Loading...
