35
Inserting the coding chip
When coding, leave your Accu-Chek Active meter turned off.
씰 Take the new coding chip from the pack of test strips.
씰 Gently slide the coding chip into the slot on the side of the
meter
➉
(see parts summary).
씰 Ensure that you push the coding chip fully home.
씰 That’s all there is to it!
When you subsequently perform your first blood glucose test with
the new coding chip (and new test strips), check that the code
number you see in the display is the same as the number printed on
the container the test strips came in. For further information please
refer to the next chapter.
35
man_04493168001_02_EnUK.indd 35 1/12/2006, 11:28:54 ðì
To Next Page
Loading...
