Setting the beep tone
After you have set the day and pressed the S button, you can either
enable or disable the beep tone.
씰 Press the M button to turn the beep tone on and off.
씰 Press the S button to complete the settings procedure.
Check that all the settings now shown on the display are correct.
Press the S button again to turn off your Accu-Chek Active meter.
If any of the settings are incorrect, you may repeat the settings
procedure (after turning the meter on again).
31
man_04493168001_02_EnUK.indd 31 1/12/2006, 11:28:53 ðì
To Next Page
Loading...
