Clearing (erasing) results from memory
You can clear the current value (and only this) from memory. This
feature is useful, for instance, if you have obtained an implausible
result. Both the result and the time and date information are erased,
though the memory location remains occupied.
An average value cannot be displayed when the most recent result
has been erased from memory. Results arising after a value has
been erased are included in calculation of the average.
Clearing the current value:
씰 Turn on your Accu-Chek Active meter by keeping the S button
pressed for longer than 3 seconds.
씰 The display shows “Clr” and “mem” (flashing).
71
man_04493168001_02_EnUK.indd 71 1/12/2006, 11:29:09 ðì
To Next Page
Loading...
Need help?
General
