This message appears ... and means:
●
in Memory Mode
●
This is a value saved in
memory.
●
(flashing) when a result
●
You are in the process
is being cleared of clearing a value from
memory.
●
after the display test in
●
Check the code number.
association with the code
number
●
(flashing) after the
●
The coding chip is missing.
display test
in association with “
---
”
●
during the display test
●
This is a pre-programmed
●
while the result is displayed unit used to state the
(Test and Memory) blood glucose result.
113
8.2 Messages and symbols
man_04493168001_02_EnUK.indd 113 1/12/2006, 11:29:24 ðì
To Next Page
Loading...
