Downloading procedure
To download data, proceed as follows:
씰 Set up the program and infrared cable according to
manufacturer’s instructions so you can start data transfer
with a mouse click.
씰 Position your Accu-Chek Active meter about 10 cm from the
infrared cable. Point the two infrared windows towards one
another.
씰 Turn on your Accu-Chek Active meter by keeping the M button
pressed (for longer than 3 seconds) until “PC” appears
flashing in the display. This indicates the meter is ready to
communicate.
77
man_04493168001_02_EnUK.indd 77 1/12/2006, 11:29:10 ðì
To Next Page
Loading...
