씰 Hold the test strip so that the application area and arrows are
facing upwards. Gently push the test strip in the direction of the
arrows into the test strip slot
➃
of your Accu-Chek Active meter,
until you hear it click into place.
Inserting the test strip automatically puts the meter in Test Mode.
Please remember that your Accu-Chek Active meter automatically
turns off after about 1–2 minutes of non-use (i.e. when no button
is pressed). If this happens, remove the test strip and repeat the
procedure described above with a new test strip.
Now watch the display.
85
man_04493168001_02_EnUK.indd 85 1/12/2006, 11:29:11 ðì
To Next Page
Loading...
