Cleaning and Disinfecting the Meter
122
On completion of cleaning:
NOTICE
Damage to the instrument
■ Ensure that no liquid enters the meter. If moisture enters the meter, it
may cause malfunction of the instrument.
■ Do not insert any objects in the test strip guide. Doing so may damage
the electrical contacts behind the test strip guide.
3 With the cover off, let the test strip guide
dry for at least 10 minutes.
4 After this time, re-attach the test strip
guide cover to the housing. Make sure
that the cover is properly closed. You will
hear it snap into place.
To Next Page
Loading...
