Roche CoaguChek XS Plus - Page 141

Supplement for Observed Test Sequence
141
Operator:
1 Touch Patient Test.
Perform the patient test as usual. Once the
test is completed, the observer has to com-
plete the next steps.
2 Hand the meter back to the observer.
Observer:
3 Touch to log in again.
4 After you enter your password, touch
to proceed with the assessment.
5 Assess the operator’s performance by
touching Pass or Fail.
6 Assess the test result by touching Accept
or Reject.
7 Touch to add a comment.
8 Touch to return to the Pat. Test - OTS
screen.
The OTS information is saved together with
the test result.
Pat. Test - OTS 09:15 am
04/19/2012
Observer Login
Patient Test
OTS enabled
Observer Login
Observer ALAN SMITHEE,
please log in to proceed.
Otherwise the OTS test will
not be complete.
I-010
Observer 09:15 am
04/19/2012
Fail
Accept
Pass
Reject
OTS passed:
Measurement Result OK?
Comment:
Remove 09:15 am
04/19/2012