Meter Setup
63
Deactivating an existing Admin. pass-
word:
1 From the Main Menu, touch Setup to
open the meter settings.
2 From the Setup Menu, touch ID Setup.
3 Using the keypad displayed on the screen,
enter the valid Admin. password.
The ID Setup menu is displayed. The
Admin. button is highlighted, which
means an Admin. password is active.
4 Touch Admin.
5 Immediately touch to close the
keypad on the screen without entering a
password.
The Admin. password has been deleted
and therefore deactivated. The Admin.
button is no longer highlighted.
Main Menu 09:15 am
04/19/2012
Control Test
Review Results
Setup
Patient Test
Setup Menu 09:15 am
04/19/2012
ID Setup
QC Settings
Options
Screen
Admin.
A
|
BCDE
FGH I J
KLMNO
PQRST
UVWXY
Z 123
09:15 am
ID Setup 09:15 am
04/19/2012
Patient
Operator
Admin.
Admin.
A
***|
BCDE
FGH I J
KLMNO
PQRST
UVWXY
Z 123
09:15 am
To Next Page
Loading...
