Roche CoaguChek XS Plus - Page 87

Testing a Blood Sample
87
Without patient list
3 Touch Patient Test.
4 If the Patient ID option was chosen as
either Optional or Required when the
meter was set up (see Meter Setup/
Patient ID), you are prompted to enter a
Patient ID.
■ If Required, enter the Patient ID, then
touch to move to the next screen.
■ If Optional, ignore the prompt and touch
to move to the next screen. The meter
will assign the test a consecutive number.
■ If neither option was chosen, a screen
appears that prompts you to insert a test
strip.
■ Continue with Step 8.
Patient ID
A
|
BCDE
FGH I J
KLMNO
PQRST
UVWXY
Z , 123
09:15 am