Testing a Blood Sample
90
The hourglass icon shows that the test strip is
warming up. When the warming-up process
is complete, a further beep (provided the
beeper is enabled) indicates that you can now
apply blood.
The blood drop icon flashes to indicate that
the meter is ready to perform the test and is
waiting for blood to be applied.
A 180 second countdown begins. You must
apply the drop of blood to the test strip before
the countdown ends. Otherwise you will
receive an error message.
Test 09:15 am
04/19/2012
P-ID: PID01
Code: 184
Smith, Henry
Op: Operator 1
Par: PT
Test 09:15 am
04/19/2012
P-ID: PID01
Code: 184
180 SEC
Smith, Henry
Op: Operator 1
Par: PT
To Next Page
Loading...
