Testing a Blood Sample
96
After the test result is displayed, touch
. You will be prompted to remove the
strip.
5 Remove the test strip from the meter.
6 Power the meter off.
7 Clean the meter if necessary (see
Chapter 9, Cleaning and Disinfecting the
Meter).
Protection against infection
When collecting samples always observe the general precautions and
guidelines relating to blood sampling (see page 16).
Dispose of all test strips used for patient testing in accordance with the
disposal policy of your laboratory or practice (see page 16).
Remove 09:15 am
04/19/2012
To Next Page
Loading...
