Rocktron REPLIFEX - 6. Operating Format

11
6. Operating Format
The Replifex

provides 128 stored sounds called presets. Any of the 128 pre-
sets can be called up at any time via the front panel PRESET control (used to both
select and recall a preset).
The root of each presets sound is its configuration. The Replifex

provides
two main effect configurations - the Classic configuration and the Rotary configura-
tion. Each configuration provides a different selection of available effects.
Classic configuration provides these effects:
• HUSH
®
• Reverb • Delay
• Parametric EQ • Compression • Phaser
• Flanger • Tremolo • Pitch Shift
• Chorus • Auto Pan • Speaker Simulator
Rotary configuration provides these effects:
• HUSH
®
• Reverb • Delay
• Parametric EQ • Compression
• Rotary Speaker • Speaker Simulator
Any of the effects provided within a particular configuration may be
switched in or out for each preset.
To see which configuration a given preset is utilizing, press the CONFIG
button on the front panel of the Replifex

- the display will show which configu-
ration ("Classic" or "Rotary") is active for the current preset. The configuration
type is displayed for a few seconds before returning to the current preset number
and title.
The block diagrams on pages 12 and 13 illustrate the basic signal path for
each configuration.
6. Operating Format