53
MIDI Dump/Load
Any or all of the Replifex
presets may be dumped to a sequencer or another Replifex
via system
exclusive messages. The information exchanged when performing a MIDI Dump consists of parameter
values, title characters and controller assignment information. When dumping a single preset into another
Replifex
, the dumped preset may be loaded into any preset location on the receiving Replifex
.
To dump a single Replifex
™
preset into another Replifex
™
Operating the Replifex
™
Connect a standard MIDI cable from the MIDI OUT of the transmitting Replifex
™
to the
MIDI IN on the receiving Replifex
™
.
Step 1
IMPORTANT: Do not allow a looping connection from the MIDI OUT/THRU of the receiving Replifex
™
back to the MIDI IN of the transmitting Replifex
™
.
Step 2
Turn the FUNCTION SELECT controls on both the transmitting and receiving Replifexes
until "MIDI DUMP/LOAD" is displayed on each.
MIDI DUMP/LOAD
MIDI DUMP/LOAD
Step 3
Turn the PARAMETER SELECT control on each unit one step clockwise to "PR DUMP/
LOAD".
1 PR DUMP/LOAD
1 PR DUMP/LOAD
RECEIVING REPLIFEX
RECEIVING REPLIFEX
TRANSMITTING REPLIFEX
TRANSMITTING REPLIFEX
To Next Page
Loading...
