38
Operating the Replifex
™
Step 5
Turn the PARAMETER SELECT control one step further clockwise to "CHAN SW 2".
CHAN SW 2 OFF
Step 6
Use the PARAMETER ADJUST control to select the on/off condition of Channel Switch 2.
When switched "ON", the channel which is connected to the Ring of the Replifex
™
CHAN-
NEL SWITCH jack will be switched when the current preset is recalled.
CHAN SW 1 ON
Step 7
Press the STORE button to save the condition of Channel Switch 2 (if changed). "STORED"
will flash briefly on the display.
STORED
Step 4
Press the STORE button to save the condition of Channel Switch 1 (if changed). "STORED"
will flash briefly on the display.
STORED
To Next Page
Loading...
