40
Operating the Replifex
™
Note: The STORE button must be pressed to save the new title. Exiting the Title Edit
function before pressing the STORE button will erase any editing that was done
in Title Edit.
Also, after flashing "STORED", the Replifex
™
will remain in the Title Edit mode.
You may either (a) turn the PRESET control to display and edit other preset titles
without having to exit and re-enter Title Edit, or (b) turn the FUNCTION SE-
LECT control to exit the Title Edit mode.
STORED
Step 5
After all the characters have been edited as needed, press the STORE button to save the new
title memory. The Replifex
™
will flash "STORED" briefly.
To Next Page
Loading...
