Rockwell Automation Allen-Bradley 440R-GL2S2T

Rockwell Automation Publication 440R-UM010C-EN-P - September 2016 9
Chapter 2
Installation
Mounting Dimensions
Figure 3 - Approximate Dimensions [mm (in.)]
DIN Rail Mounting and Dismounting
The GLT safety relay easily mounts onto 35mm DIN Rails: 35x7.5x1mm
(EN50022 - 35x7.5).
1. Hold the top at an angle
2. Slide down until the housing catches the rail.
3. Swing the bottom down and give a little push until the latch clips onto
the rail.
Figure 4 - DIN Rail Mounting
113.6 (4.47)
119.14
(4.69)
22.5
(0.88)
DIN Latch
DIN Rail