Need help?Do you have a question about the Rockwell Automation Allen-Bradley 5069-AENTR and is the answer not in the manual?
General| Product Type | Ethernet/IP Adapter |
|---|---|
| Communication Protocol | Ethernet/IP |
| Power Supply Voltage | 24V DC |
| Mounting | DIN rail |
| Series | 5069 |
| Ports | 2 |
| Enclosure Type | Open-style |
Details supported EtherNet/IP capabilities, communication rates, and protocols for the adapters.
Explains the security enhancement that restricts configuration changes to maintain operational stability.
Describes the use of SD cards for configuration storage and data management on the 5069-AEN2TR adapter.
Explains connecting external power supplies to the adapter using removable terminal blocks (RTBs).
Details system-side power (MOD power) requirements, limits, and distribution through the power bus.
Details field-side power (SA power) requirements, limits, and distribution for Compact 5000 I/O modules.
Outlines configuring the adapter's IP address for proper network operation and its necessity.
Details using rotary switches for IP address configuration, especially for initial out-of-box setup.
Describes alternative IP configuration methods like BOOTP/DHCP utility and RSLinx software.
Provides step-by-step instructions for resetting the 5069-AENTR adapter to factory defaults using rotary switches.
Details resetting the 5069-AENTR adapter to factory defaults using its physical reset button.
Guides adding the EtherNet/IP adapter to a Logix Designer controller project for configuration and parameter setup.
Explains status indicators on the 5069-AENTR adapter, their states, and recommended actions.
Explains status indicators on the 5069-AEN2TR adapter, their states, and recommended actions.
To Next Page
