EasyManua.ls Logo

Rockwell Automation Allen-Bradley 1794-AENTR User Manual

Rockwell Automation Allen-Bradley 1794-AENTR
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
User Manual
FLEX I/O Dual Port EtherNet/IP Adapter Modules
Catalog Numbers
1794-AENTR, 1794-AENTRXT

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Rockwell Automation Allen-Bradley 1794-AENTR and is the answer not in the manual?

Rockwell Automation Allen-Bradley 1794-AENTR Specifications

General IconGeneral
Communication ProtocolEthernet/IP
Network AddressConfigurable via software
Current Draw, Max200 mA
Shock30 g
Data Rate10/100 Mbps
Number of Ports1
Port TypeRJ45
MountingDIN Rail
Product TypeEtherNet/IP Adapter
Series1794
Power Supply Voltage24V DC
Operating Voltage19.2V to 30V DC
Operating Temperature-20°C to 60°C
Storage Temperature-40°C to 85°C
Relative Humidity5% to 95% (non-condensing)
CertificationsCE, UL, cUL

Summary

Important User Information

Safety Guidelines and Symbols

Explains safety warnings, hazards, and definitions for safe operation.

Liability and Usage Disclaimers

Covers disclaimers on liability, use of examples, and patent information.

Preface

Manual Audience and Purpose

Defines target users, manual objectives, and related documentation.

Manual Conventions

Explains conventions used throughout the manual for clarity.

Chapter 1: Overview of FLEX I/O and Your Redundant EtherNet/IP Adapter Module

FLEX I/O System and Adapter Features

Describes the FLEX I/O system, adapter features, types, and compatibility.

Protocol, Networking Models, and Connections

Explains CIP protocol, producer/consumer model, RPI, and connection types.

Chapter 2: Install Your FLEX I/O Adapter

Module Components and Mounting Procedures

Details adapter components and installation on DIN rails or panels.

Wiring and Network Address Configuration

Covers connecting wiring and setting the network IP address.

Chapter 3: Configure the Adapter for Your EtherNet/IP Network

Configuration Prerequisites and IP Addressing

Outlines requirements and configuring the adapter's IP address.

Gateway, Subnet Mask, and BootP/DHCP Utility

Explains gateway, subnet, and using the BootP/DHCP utility.

Chapter 4: Rack Optimized Discrete I/O

Hardware Setup and Example Application Creation

Describes hardware setup and creating a sample application project.

I/O Configuration and Ladder Program Development

Details configuring I/O modules and creating ladder logic.

Chapter 5: Analog I/O with Direct Connection

Analog I/O Hardware and Example Setup

Covers hardware setup for analog I/O and creating an example.

Analog Module Configuration and Controller Tags

Explains configuring analog modules and managing controller tags.

Appendix A: Interpret Status Indicators

Adapter Status Indicator Guide

Describes the status indicators on the adapter and their meanings.

Appendix B: Configure the RSLinx Ethernet Communication Driver

RSLinx Software Installation and Driver Setup

Covers installing RSLinx and configuring the Ethernet driver.

Appendix C: Adapter Web Dialogs

Web Interface Navigation and Home Page Access

Explains accessing the adapter's web interface and home page.

Diagnostics, Network, and Configuration Pages

Details accessing and using diagnostic, network, and configuration pages.

Ethernet Statistics, I/O Connections, and Services

Describes viewing statistics, connections, and managing services.

Rockwell Automation Support

Installation and Product Return Assistance

Information on getting help with installation and product returns.

Documentation Feedback Mechanism

Instructions for providing feedback on the manual.

Related product manuals