Publication 1794-UM066B-EN-E - March 2015
68 Adapter Web Dialogs
–Secondary Name Server
–Domain Name
• For Ethernet Link Port 1 and Port 2, specify the following:
– Autonegotiate Status
- Autonegotiate Speed and Duplex
- Force Speed and Duplex
– Select Port Speed – 10 megabits, 100 megabits
– Select Duplex Mode – Half Duplex, Full Duplex
7. From the Network Configuration page, click Apply Changes to save the
modified values.
Use the Device Services Page
To use the Services page to change the password for the Configuration web page
or disable the web server, click Device Services tab at the top of the page or panel
on the left.
The Device Services page opens.
From the Services page, make these entries.
• Click the Enable box to change whether the web server runs after the
module is reset.
• Change the password by typing a new value for New Password and
Confirm Password, noting the following:
– The entry is case sensitive.
– The default value is <blank>.
8. Click Apply Changes.
To Next Page
Loading...
Need help?
General
