i Publication 2711P-UM001D-EN-P - September 2005
Preface
Objectives
This preface provides information on the contents of this manual
including:
• Intended audience
• Parts List
• Contents of manual
• Additional resources
• Software and firmware upgrades
• European Communities (EC) Directive Compliance
Parts List
The PanelView Plus terminals ship with:
• Power terminal block
• RSView Machine Edition Runtime (preloaded)
• Mounting levers for 400 and 600 terminals (quantity 8)
• Mounting clips for 700 - 1500 terminals (quantity 4 to 8)
• Installation instructions
• Panel cutout template
Intended Audience
Use this manual if you are responsible for installing, operating, or
troubleshooting the PanelView Plus terminals.
No special knowledge is required to understand this manual or
operate the terminal. However, it is important that you understand the
functions and operations of Machine Edition applications that will run
on the terminal. Consult the application designer for this information.
Equipment installers must be familiar with standard panel installation
techniques.
To Next Page
Loading...
