Publication 2711P-UM001D-EN-P - September 2005
4-32 Configuration Mode
Startup Tests
The terminal can run extended tests on startup. The Startup Tests
screen provides access to these screens:
• Startup Tests Settings
• Repeat Count
Select Tests
The Select Tests screen shows a list of each test that can be performed
on the terminal at startup and its current On/Off status. You can turn
any test in the list on or off by selecting the On/Off button. The
terminal will only run tests with a checked box.
IMPORTANT
Startup Tests apply only to PanelView Plus 700 -
1500 terminals.
Terminal Settings
Startup Options
Startup Tests
To Next Page
Loading...
