Rockwell Automation B Series

142 Rockwell Automation Publication 520-UM001I-EN-E - July 2016
Chapter 3 Programming and Parameters
Modified Parameter Group
This group contains parameters that have their values changed from the factory
default.
When a parameter has its default value changed, it is automatically added to this
group. When a parameter has its value changed back to the factory default, it is
automatically removed from this group.
Fault and Diagnostic Group
F604 [Fault 4 Code] Related Parameter(s): b007-b009
F605 [Fault 5 Code]
F606 [Fault 6 Code]
F607 [Fault 7 Code]
F608 [Fault 8 Code]
F609 [Fault 9 Code]
F610 [Fault10 Code]
A code that represents a drive fault. The codes appear in these parameters in the order they occur (b007 [Fault 1 Code] = the most recent fault). Repetitive faults are only recorded once.
Values Default: Read Only
Min/Max: F0/F127
Display: F0
F611 [Fault 1 Time-hr]
F613 [Fault 3 Time-hr]
F615 [Fault 5 Time-hr]
F612 [Fault 2 Time-hr] Related Parameter(s): d362
F614 [Fault 4 Time-hr]
F616 [Fault 6 Time-hr]
F618 [Fault 8 Time-hr]
F620 [Fault10 Time-hr]
PowerFlex 525 only.
F617 [Fault 7 Time-hr]
F619 [Fault 9 Time-hr]
Displays the value of d362
[Elapsed Time-hr] when the fault occurs.
Values Default: Read Only
Min/Max: 0/32767 hr
Display: 1 hr
PF 525
F621 [Fault 1 Time-min]
F623 [Fault 3 Time-min]
F625 [Fault 5 Time-min]
F622 [Fault 2 Time-min] Related Parameter(s): d363
F624 [Fault 4 Time-min]
F626 [Fault 6 Time-min]
F628 [Fault 8 Time-min]
F630 [Fault10 Time-min]
PowerFlex 525 only.
F627 [Fault 7 Time-min]
F629 [Fault 9 Time-min]
Displays the value of d363
[Elapsed Time-min] when the fault occurs.
Values Default: Read Only
Min/Max: 0.0/320.0 min
Display: 0.1 min
PF 525