Appendix A Glossary
122
report aggregation - batch
In the Recipe Editor, a report parameter (output) that is defined to add
each uploaded value to the report to its current value and store that
value for the duration of the batch.
report aggregation - none
In the Recipe Editor, a report parameter (output) that is defined to
store an uploaded value, overwriting any value previously there. This is
the behavior of report parameters in versions before FactoryTalk Batch
11.0 and is still the default behavior.
report aggregation - phase
In the Recipe Editor, a report parameter (output) that is defined to add
each uploaded value to the report to its current value and store that
value until the phase is reset.
report parameter
A value specific to a phase. It is a value that is passed from the process-
connected device (PCD) to the FactoryTalk Batch Server where it can
be used in reports. Typically, the report parameter is a process value.
requested list
When the arbitration focus is in the owner perspective, this list
displays the roster of resources requested by the resource or recipe that
is identified in the Name box.
resetting
Resetting is a possible state of the Firing attribute of a transition.
When the transition is in the Resetting state, it has issued RESET
commands to the preceding steps and is waiting for them to transition
to IDLE states in response to the command.
resource
A general term for equipment including process cells, units, phases,
and shared control modules.
To Next Page
Loading...
Need help?
General
