1-2 PowerFlex 40 Standard Configured Drive Standard Features and Options
Publication 23B-IN001G
Enclosure Options
NEMA/UL Type 4 (Position 9, Code D)
The enclosure provided is a NEMA/UL Type 4, painted mild steel, which
supports both NEMA/UL Type 4 and NEMA/UL Type 12 applications.
Type 4 enclosures are intended for indoor or outdoor use primarily to
provide a degree of protection against windblown dust and rain, splashing
water, and hose directed water, and to be undamaged by the formation of ice
on the enclosure. They are designed to meet hose-down, dust, and external
icing and rust resistance design tests. Doors and openings will be gasket
sealed. There are no ventilation openings within the enclosure to allow for
free exchange of inside and outside air.
Note: If optional Door Mounted HIM is not supplied, the design of the
PowerFlex 40 Standard Configured Drive supports indoor and outdoor
applications that are not in direct sunlight.
NEMA/UL Type 4X (Position 9, Code C)
The enclosure provided is a NEMA/UL Type 4X. The material is type 304
stainless steel. Type 4X enclosures are intended for indoor or outdoor use
primarily to provide a degree of protection against corrosion, windblown
dust and rain, splashing water, and hose directed water, and to be
undamaged by the formation of ice on the enclosure. They are designed to
meet hose-down, dust, and external icing and rust resistance design tests.
Doors and openings will be gasket sealed. There are no ventilation openings
within the enclosure to allow for free exchange of inside and outside air.
Note: If optional Door Mounted HIM is not supplied, the design of the
PowerFlex 40 Standard Configured Drive supports indoor and outdoor
applications that are not in direct sunlight.
To Next Page
Loading...
Need help?
General
