Contents CMU
1100.4903.82 6 E-5
Replacing the Memory Modules in the FRONT MODULE .....................................................3.34
Opening the instrument and removing the FRONT MODULE ........................3.34
Making the memory modules accessible ........................................................3.35
Removing the memory module .......................................................................3.35
Installing the new memory module and completing the instrument ................3.35
Putting into operation ......................................................................................3.36
Replacing the LCD and/or DC/AC Converter in the FRONT MODULE .................................3.37
Opening the instrument and removing the FRONT MODULE ........................3.37
Making the LCD accessible.............................................................................3.38
Removing the LCD and/or DC/AC Converter..................................................3.38
Installing the new LCD and/or DC/AC converter and compl. the instrument ..3.38
Putting into operation ......................................................................................3.38
Replacing the Keyboard Membrane and/or Mat on the FRONT MODULE............................3.39
Opening the instrument and removing the FRONT MODULE ........................3.39
Removing the membrane................................................................................3.40
Installing the new membrane and completing the instrument.........................3.40
Putting into operation ......................................................................................3.40
Replacing the Labeling Panel on the FRONT MODULE........................................................3.41
Removing the old labeling panel .....................................................................3.41
Installing the new labeling panel and completing the instrument ....................3.41
Putting into operation ......................................................................................3.41
Replacing the Options FLOPPY DISK DRIVE R&S CMU-B61 or PCMCIA INTERFACE......3.42
Opening the instrument and removing the FRONT MODULE ........................3.42
Replacing the option........................................................................................3.43
Completing the instrument and putting into operation.....................................3.43
Replacing the RF FRONTEND ..............................................................................................3.44
Opening the instrument and removing the RF FRONTEND ...........................3.44
Installing the new RF FRONTEND MODULE and compl. the instrument.......3.44
Automatic module data adjustment.................................................................3.44
Replacing the REFERENCE BOARD ....................................................................................3.45
Opening the instrument and removing the REFERENCE BOARD .................3.45
Installing the new REFERENCE BOARD and completing the instrument ......3.45
Automatic module data adjustment.................................................................3.45
Replacing the RXTX BOARD1...............................................................................................3.46
Opening the instrument and removing the RXTX BOARD1 ...........................3.46
Installing the new RXTX BOARD1 and completing the instrument.................3.46
Automatic module data adjustment.................................................................3.46
Replacing the TR-CORRECTION MODULE in the RXTX BOARD1 .....................................3.47
Opening the instrument and removing the TR-CORRECTION MODULE ......3.47
Installing the new TR-CORRECTION BOARD and compl. the instrument.....3.47
Automatic module data adjustment.................................................................3.47
Replacing the DIGITAL BOARD.............................................................................................3.48
Opening the instrument and removing the DIGITAL BOARD .........................3.48
Installing the new DIGITAL BOARD and completing the instrument ..............3.48
Automatic module data adjustment.................................................................3.48
Replacing the MODULES: ADC MODULE1, DDC MODULE1, TXDSP MODULE1, AUC
MODULE1 in the DIGITAL BOARD .......................................................................................3.49
Opening the instrument and removing the modules .......................................3.49
Installing the new sandwich module and completing the instrument ..............3.49
Automatic module data adjustment.................................................................3.50
To Next Page
Loading...
