Rohde & Schwarz CMU 200 Service Manual

Measuring Instruments and Auxiliary Equipment R&S CMU
1100.4903.82 1.4 E-5
DUT
(CMU)
NRV-Z4
NRVD
-33 dBm/
-16 dBm
TX2
R
F1 /
R
F2
DUT
(CMU)
-93 dBm to -33 dBm/
-76 dBm to -16 dBm/
-55 dBm to +5 dBm
TX3
RF1 /
RF2 /
R
F3 OUT
FSIQ or FSE
10 MHz Reference Freq.
DUT
(CMU)
RF-PreAmp
36 dB
FSE
or FSIQ
-130 dBm to -93 dBm/
-117 dBm to -76 dBm/
-90 dBm to -55 dBm
10 MHz Reference Freq.
TX4
RF1/
RF2/
RF3 OUT
General TX measurements
Test setup TX5:
DUT
(CMU)
Spectrum
analyzer
(FSE or
FSIQ)
10 MHz Reference Freq.
RF1, RF2, RF3 OUT
AUX3, pin2
ext. Trigger input
TX5

Rohde & Schwarz CMU 200 Specifications

General

Brand	Rohde & Schwarz
Model	CMU 200
Category	Test Equipment
Language	English