Operation
R&S
®
EB510
16Getting Started 4091.7338.02 ─ 01
2.2 Rear-Panel Tour
The various inputs and outputs located on the rear panel of the R&S EB510 are
briefly explained in the paragraphs below.
In the following overview, the index numbers refer to the labels in the figure above.
1. X1 Power Supply.
Standard Speakon NL4FX socket for DC power input. Socket accepts 10~32 VDC
on pin 1+ and ground on pin 1- of connector. Power requirement as indicated.
2. Antenna Inputs.
X10 / X11 / X12 Antenna inputs for HF band 9 kHz to 32 MHz.
3. X7 LAN Port.
A 10/100/1000Base-T port for remote control via LAN.
4. Miscellaneous I/O.
● X13 REF IN BNC input for synchronizing with an external 10 MHz reference
frequency normal.
Rear-Panel Tour
To Next Page
Loading...
