Operation
R&S
®
EB510
28Getting Started 4091.7338.02 ─ 01
c) Pressing the SELECT rollkey (5g) toggles the selected set of markers on and
off.
d) The ATT key selects the RF attenuation function. Pressing the SELECT roll-
key (5g) toggles between automatic and manual attenuation. When in man-
ual attenuation mode, turning the SELECT rollkey (5h) will allow the manual
attenuation level to be set.
e) The MGC key selects the modulation gain control for amplitude modulated
modes. Pressing the SELECT rollkey (5g) toggles between automatic and
manual gain control. When in manual gain control mode, turning the
SELECT rollkey (5h) allows the manual gain control value to be set.
f) The SQU key selects the audio squelch control. Pressing the SELECT rollkey
(5g) toggles squelch on and off. When squelch is on, turning the SELECT
rollkey (5h) sets the squelch level.
The selected field for ATT, MGC and SQU is highlighted in yellow with the text
in inverse color as illustrated (ATT set to AUTO).
6. Configuring the display scale for IF panorama.
Graphical User Interface (GUI)
To Next Page
Loading...
