Software and Firmware Update
R&S
®
EB510
56Getting Started 4091.7338.02 ─ 01
If your local network has a DNS server and you know the serial number of the
R&S EB510 then it can be more convenient to use DHCP with the name under which
the R&S EB510is known: for a R&S EB510 with serial number e.g. 100001-002 the
DHCP name will be: "rs-eb510-100001-002".
In the next step, choose the display resolution. Note that the resolution refers to the
panel resolution. When the emulated front panel buttons are included, the resolution
of your PC monitor must be higher than the size stated in the settings below, oth-
erwise the buttons might not fit in the screen. A resolution of 800x600 will fit on most
monitors.
Finally configure the installation folder.
GUI Installation for Remote Access
To Next Page
Loading...
