Rohde & Schwarz FSH20 - Interference Analyzer (R&S FSH-K15; -K16)

R&S FSH Interference Analyzer (R&S FSH-K15/ -K16)
Performing Pulse Power Measurements (R&S FSH-K29)
Operating Manual 1173.6275.12 - 30 152
5 Interference Analyzer (R&S FSH-K15/ -K16)
In wireless systems, interference causes low data rates, dropped calls and poor voice
quality, often making it impossible to establish or maintain a connection.
Equipped with option R&S FSH-K15 (order no. 1309.7488.02), option R&S FSH-K16
(order no. 1309.7494.02) and / or R&S FSH-K17 (order no. 1304.5893.02), you can
track down the source of interferences with your R&S FSH. These options provide
tools and means to make the search for interferers as comfortable as possible.
To measure interferences, you'll also need a directional antenna like the R&S HL300
(order no. 4097.3005.02). For more information refer to the Quick Start Guide.
The interference analyzer provides several measurement modes.
► Press the MODE key.
► Press the "Receiver / Interferences" softkey.
Interference analyzer (R&S FSH-K15)
► Select the "Interference Analyzer" menu item.
The R&S FSH enters the interference analyzer.
For more information see "Measuring the Spectrum" on page 154.
Map mode
► Select the "Maps" menu item.
The R&S FSH enters the map application.
Triangulation (R&S FSH-K15)
► Press the MEAS key.
► Press the "Meas Mode" softkey.
► Select the "Triangulation" menu item.
The R&S FSH provides the triangulation measurement functions.
For more information see "Working with Maps" on page 157.
Geotagging (R&S FSH-K16)
► Press the MEAS key.
► Press the "Meas Mode" softkey.
► Select the "Geotagging" menu item.
The R&S FSH provides the geotagging measurement functions.
For more information see "Working with Maps" on page 157.