Rohde & Schwarz FSH20 - Using Limit Lines; Using Transducers; Working with Traces

R&S FSH Receiver Mode (R&S FSH-K43)
Configuring Measurements in Receiver Mode
Operating Manual 1173.6275.12 - 30 242
8.2.4 Working with Traces
In Receiver mode, the R&S FSH provides several ways to configure the trace display,
like the trace mode or trace mathematics.
For more information see
● "Selecting the Trace Mode" on page 111
● "Working with a Second Trace" on page 114
● "Working with Memory Traces" on page 115
● "Using Trace Mathematics" on page 115
● "Performing Frequency Scans" on page 235
8.2.5 Using Transducers
For more information see "Using Transducer Factors" on page 130.
8.2.6 Using Limit Lines
For more information see "Using Limit Lines" on page 126.