R&S FSH Digital Modulation Analyzer
Configuring Measurements in Receiver Mode
Operating Manual 1173.6275.12 - 30 243
9 Digital Modulation Analyzer
In digital modulation analyzer operating mode, the R&S FSH is able to demodulate
signals of several telecommunications technologies. Thus it can provide results for
modulation characteristics, channel characteristics or information about the signal
quality.
The digital modulation analyzer consists of several firmware options. Each option
covers a specific telecommunications standard with functionality especially designed
for that technology.
● "Measurements on GSM Signals" on page 252
● "Measurements on 3GPP FDD Signals" on page 260
● "Measurements on CDMA2000 Signals" on page 273
● "Measurements on 1xEV-DO Signals" on page 285
● "Measurements on TD-SCDMA Signals" on page 292
● "Measurements on LTE Signals" on page 308
Each option of the digital modulation analyzer comes with a result summary. This
result display summarizes the most relevant results that you will need for successful
base station tests. For some options there is also an extended version that features
additional functionality like graphic results.
To Next Page
Loading...
