R&S FSH Digital Modulation Analyzer
Measurements on LTE Signals
Operating Manual 1173.6275.12 - 30 315
9.8.2 The Result Summary for Carrier Aggregation
The R&S FSH supports measurements on LTE signals with carrier aggregation. In that
case, you can define and analyze the characteristics of up to five component carriers.
The results are displayed in a separate result summary for carrier aggregation.
► Press the "Result Display" softkey.
► Select the "Carrier Aggregation" menu item.
The R&S FSH starts the result summary.
When you start the measurement, the R&S FSH performs a measurement on each
carrier and displays the results.
For each component carrier, the R&S FSH displays several results that are similar to
those displayed in the regular result summary. The size of the table depends on the
number of selected carriers. For more information about the results see "The Result
Summary" on page 309.
For more information about configuring component carriers see "Configuring
Component Carriers" on page 324.
To Next Page
Loading...
