R&S FSH Digital Modulation Analyzer
Measurements on GSM Signals
Operating Manual 1173.6275.12 - 30 253
9.3.1 The Result Summary
The default result display is the result summary. The result summary shows various
measurement results and hardware settings in numerical form.
► Press the "Result Display" softkey.
► Select the "Result Summary" menu item.
The R&S FSH shows the numerical results in a table.
1 Current type of result display
2 Currently selected standard
3 General settings
4 Global results
5 Channel results
6 Synchronization state
- green font: synchronization OK
- red font: synchronization failed
7 GSM softkey menu
9.3.1.1 General Settings
For more information see "General Settings of the Digital Modulation Analyzer" on
page 244.
In addition the application features some settings specific to the 3GPP standard.
For more information on each type of parameter see "Configuring the Measurement"
on page 269.
Trigger
Shows the current trigger mode.
For more information see "Working with Trigger Functionality" on page 106.
To Next Page
Loading...
