Rohde & Schwarz FSH20 - The Code Domain Channel Table

R&S FSH Digital Modulation Analyzer
Measurements on 3GPP FDD Signals
Operating Manual 1173.6275.12 - 30 267
9.4.3 The Code Domain Channel Table
If you equip the R&S FSH with option R&S FSH-K44E, the code domain channel table
becomes available to visualize the channel structure of the signal.
The code domain channel table shows various parameters and measurement results
on (code) channel level.
Screen layout of the code domain channel table result display
1 Current type of result display
2 Currently selected standard
3 Header table
4 Synchronization state and GPS information
- green font: synchronization OK
- red font: synchronization failed
5 Global results
6 Channel table
7 WCDMA softkey menu
9.4.3.1 Header Table
The header table contains various settings already discussed in the sections above.
For more information see "General Settings of the Digital Modulation Analyzer" on
page 244 and "The Result Summary" on page 261.
9.4.3.2 Global Results
The global results include information about the complete signal.
Channel Power
Shows the power of the complete signal.