R&S FSH Operating the R&S FSH
Managing Datasets
Operating Manual 1173.6275.12 - 30 30
Templates
The R&S FSH also supports various other types of datasets (or templates). Such
templates mainly contain additional requirements for a particular measurement, like
limit lines or channel tables.
Creating and editing these templates is only possible with the functionality provided by
the R&S FSH4View software package. Note that the file extension depends on the
application of the template. For example, a template containing a channel table has the
extension .chntab.
For more information on working with templates refer to the documentation of the
R&S FSH4View software package.
Data synchronization
The R&S FSH4View features a data synchronization that matches the data available
on the R&S FSH and that on the computer with the R&S FSH4View installation.
► Press the "Synchronization Control" ( ) button.
The software opens another dialog box to control synchronization.
By default, the software synchronizes a selected set of data, depending on the
synchronization direction.
● Synchronization from PC to R&S FSH: button
Updates all files on the R&S FSH that have been created or edited with the
R&S FSH4View software package (cable models, limit lines, transducers, channel
tables etc.).
● Synchronization from R&S FSH to PC: button
Updates all files on the PC that have been created on the R&S FSH (datasets,
screenshots and wizard results).
Alternatively, you can synchronize all files at the same time
(templates and datasets) in one direction (PC to R&S FSH
or R&S FSH to PC), regardless of the file type.
► Turn on "Synchronize All".
► Press either the "FSH
←
PC" button to update all files on the R&S FSH based on
the data available on the PC or the "FSH
→
PC" button to update the files on the
PC based on the data available on the R&S FSH.
To Next Page
Loading...
