R&S FSP Troubleshooting
1164.4556.82 3.73 E-1
Normal action Error and error cause
After this test, the BIOS has been loaded and the operating system
is started.
The message „No System Disk
or Disk error ...“ at this point
indicates that the contents of the
hard disk are not correct.
Replace the hard disk.
After Windows XP was installed correctly, the following selection
menu is displayed:
Please select the operating system to start:
Analyzer Firmware
Analyzer Firmware Backup
Use the up and down arrow keys to move the highlight to your
choice.
Press ENTER to choose.
Seconds until highlighted choice will be started automatically: 0
For troubleshooting and advanced startup options for Windows,
press F8.
After Windows XP was installed
correctly, the following selection
menu is displayed:
To Next Page
Loading...
