Rohde & Schwarz FSP3 - Checking Level Accuracy and Frequency Response

R&S FSP Performance Test
1164.4556.82 1.11 E-1
Checking Level Accuracy and Frequency Response
Test equipment:
- Signal generator:
R&S FSP 3: Refer to "Measurement Equipment", item 3.
R&S FSP 7/13/30:Refer to "Measurement Equipment", items 3 & 4.
Frequency range R&S FSP 3: 1 MHz to 3 GHz
R&S FSP 7: 1 MHz to 7 GHz
R&S FSP 13: 1 MHz to 13.6 GHz
R&S FSP 30: 1 MHz to 30 GHz
R&S FSP 40: 1 MHz to 40 GHz
Maximum level  0 dBm
- Power meter (refer to "Measurement Equipment", item 8)
- Power sensor:
R&S FSP 3: Refer to "Measurement Equipment", item 9.
R&S FSP 7/13/30: Refer to "Measurement Equipment",
items 9 & 10.
Frequency range R&S FSP 3: 1 MHz to 3 GHz
R&S FSP 7: 1 MHz to 7 GHz
R&S FSP 13: 1 MHz to 13.6 GHz
R&S FSP 30: 1 MHz to 30 GHz
R&S R&S FSP 40: 1 MHz to 40 GHz
Maximum power P
max
 100 UW
RSS referenced to indicated power
1 MHz to 1 GHz  1.5 %
1 GHz to 7 GHz  2 %
7 GHz to 13.6 GHz  3.5 %
13.6 GHz to 40 GHz  4 %
Impedance Z = 50 
- Power splitter (refer to "Measurement Equipment", item 6)
Frequency range R&S FSP 3: 1 MHz to 3 GHz
R&S FSP 7: 1 MHz to 7 GHz
R&S FSP 13: 1 MHz to 13.6 GHz
R&S FSP 30: 1 MHz to 30 GHz
R&S FSP 40: 1 MHz to 40 GHz
Level imbalance
1
) 1 MHz to 1 GHz  0.1 dB
1 GHz to 7 GHz  0.2 dB
7 GHz to 13.6 GHz  0.3 dB
13 GHz to 40 GHz  0.4 dB
1
) If a power splitter with higher level imbalance is used, correction
of the measured frequency response is recommended.