Preparing for Use
R&S
®
FSWP
25Getting Started 1177.5756.02 ─ 13
The standard Windows "Screen Resolution" dialog box is displayed.
5. Select the instrument for display:
● "Display 1" : internal monitor only
● "Display 2" : external monitor only
● "Duplicate" : both internal and external monitor
6. Tap "Apply" to try out the settings before they are accepted permanently, then
you can easily return to the previous settings, if necessary.
7. Select "OK" if the settings are suitable.
3.10 Windows Operating System
The instrument contains the Microsoft Windows operating system which has been
configured according to the instrument's features and needs. Changes in the sys-
tem setup are only required when peripherals like a keyboard or a printer are
installed or if the network configuration does not comply with the default settings.
After the R&S FSWP is started, the operating system boots and the instrument
firmware is started automatically.
Windows Operating System
To Next Page
Loading...
